Dashcams have become a must-have item in most cars today, and regardless of the car type or camera type, the dash cam installation must be done correctly. Failure to watch out for this can lead to poor video footage when an issue occurs. Whether you are looking to document your road trips or have evidence in case of an accident, a dash cam is a crucial addition to your vehicle.
Dashcam installation may seem more complicated than it is. However, these steps will ensure your dash cam installation goes smoothly. From the perfect placement of the camera to routing the cables in the car, this guide will help streamline the process, making it easy for you.
Step 1: Identify A Suitable Mounting Spot
Before you get down to installing your car camera, identify a spot fit suitable for the camera. A suitable spot will ensure your car camera recorder works properly and can capture all footage as required. Always ensure the camera is centred to maximise coverage of the left and right sides of the car. Some states have laws and restrictions about dash cam installations; therefore, ensure you inquire and adhere to the guidelines. For some cars, mounting the dash cam behind the rear-view mirror will do the trick. Therefore, ensure it’s securely mounted and not obstructing the driver’s view or other car functions.
Step 2: Locate A Power Supply
Identify a power source near where you want to mount the camera. The vehicle’s USB charging outlet or cigarette socket can be ideal for most cars. Identifying the power source lets you strategically plan how the camera cables can be routed, minimising any cable obstruction.
Step 3: Clean The Spot
You have identified a spot and located a power supply, it’s time to get your dash cam up and running. Start by cleaning the spot. Use a soft cloth with a cleaning solution and wipe the area down. It ensures getting rid of all the dust or oil for an effective grip by the camera suction.
Step 4: Paste The static Side Film
Most dash cams come with how to install dash cam instructions from the manufacturer and which cars they are compatible with. Because you can’t drill holes in your windshield, most of them usually have a static side film that you stick to the surface you want to mount it on. After cleaning the spot, paste this film on the surface if you mount the camera on glass.
It helps protect the glass and makes it easy to move the camera in the future. However, if you want to use an adhesive mount, you can stick it directly on the dotted spots of the windshield without using the static side film.
Step 5: Attach The Bracket
Then you must remove the protective film from your dash cam’s suction cup and attach it to the static side film. If you use the adhesive mount, it’s best to keep pressing for at least 30 seconds for complete attachment.
Step 6: Hide The Cables
You can use a magnetic mount to hide the dash cam cables into the roof liner. Remove the waterproof rubber on the side of the door gently, and remove the A-pillar trim cover with more force. Then hide the cables in the gap in front of the A-pillar. Don’t cross the airbag. Tuck the wires into the trim along the edge of the A-pillar, and tuck the wires into the gap of the waterproof rubber. Then put the waterproof strip back in place.
Step 7: Install The Camera And Adjust The Angle
After the mount is in place, you can connect the car camera recorder to the mount. Start your car engine, and the camera will power on automatically. Watch the screen and adjust the shooting angle. After changing it, tighten the locking ring.
And just like that, now you have your dash cam up and running. To know how to install a dash cam, you don’t need much knowledge about car cameras. You only need to follow the manufacturer’s instructions and do it yourself. However, if you don’t understand or can’t figure the whole process out, you can contact a professional vehicle technician for help. After it’s done, you can drive safely and freely and enjoy the benefits of having a car camera.